Wide Edgestitching

1

Distance in mm

2

Distance in inch

  1. Fit the blind stitch foot, edge stitch foot or zigzag foot.
  2. Set the stitch pattern selector knob to A.
  3. Set the required stitch length.
  4. Set the stitch width to 0.

Using the Zigzag Foot

  1. Guide the edge of the fabric along either the right-hand edge of the presser foot or the markings on the stitch plate.

The markings on the stitch plate indicate the distance between the center needle position and the guideline.

Using the Blind Stitch Foot or Edge Stitch Foot

  1. Place the left-hand edge of the fabric against the guide of the blind stitch foot or edge stitch foot.
  2. Select the left needle position at the desired distance to the edge.