Fitting the presser foot sole

    Prerequisite:

  1. The presser foot sole is removed.
  1. Raise the presser foot.

  2. NOTICE

    Needle breakage caused by incorrect presser foot

    If the presser foot is not suitable for the selected stitch, the needle may collide with the presser foot and break.

    1. Always use a presser foot that is suitable for the stitch.
  3. Position the new presser foot sole under the notch in the shaft (1) so that the notch in the shaft is positioned above the presser foot sole pin (2).
  4. Carefully lower the presser foot lifter until the notch in the shaft engages with the presser foot sole pin.