Appliqués

Appliqués attached using the blanket stitch look as if they have been sewn by hand.

  1. Place an appliqué on the fabric and baste or pin it in place, or iron it on using double-sided adhesive non-woven material.
  2. Fit the zigzag foot or open embroidery foot.
  3. Set the stitch pattern selector knob to position D.
  4. Set the stitch length knob to S2.
  5. Set the required stitch width.
  6. Sew while guiding the fabric so the needle falls along the outer edge of the appliqué.
  7. When sewing around a corner, stop the machine with the needle in the lower position at the outer edge of the appliqué. Raise the presser foot and pivot the fabric around the needle to change the sewing direction.