Cleaning the Bobbin Case

CAUTION

Electronically Driven Components

Risk of injury near the needle and the hook.

  1. Switch the machine off and disconnect it from the power supply.
  1. Remove the presser foot and the needle.
  2. Open the bobbin cover and remove the top bobbin cover.
  3. Remove the stitch plate.
  4. Remove the bobbin from the bobbin case.
  5. Clean the bobbin case with the brush.
  6. Set needle to topmost position.
  7. Clean the shuttle race with the brush.
  8. Insert the bobbin into the bobbin case.
  9. Fit the stitch plate.
  10. Attach the top bobbin cover and close the bobbin cover.
  11. Fit the needle and presser foot.