Cleaning the Feed Dog and the Hook
Remaining threads under the stitch plate must occasionally be removed.
CAUTION
Electronically Driven Components
Risk of injury near the needle and the hook.
- Switch the machine off and disconnect it from the power supply.
- Remove the presser foot and the needle.
- Open the bobbin cover and remove the top bobbin cover.
- Loosen both screws and remove the stitch plate.
- Remove the bobbin case and the bobbin.
- Clean the feed dog and the hook with the brush.
- Refit the stitch plate. Insert both screws and tighten them.
- Attach the top bobbin cover and close the bobbin cover.
- Insert a needle.
- Attach the presser foot.