Winding the Bobbin Thread

1

Stopper

2

Bobbin Winder Unit

3

Bobbin Winder Pretension

4

Thread Guide

5

Thread Guide Wires

6

Spool Pin

  1. To prevent slippery threads from catching or breaking, pull the spool net over the spool.
  2. Place the thread spool and the spool disc on the spool pin.
  3. Feed the thread through the thread guide wire and the thread guide.
  4. Feed the thread around the bobbin winder pre-tensioner.
  5. Pull the end of the thread through one of the inner holes on the bobbin and place the empty bobbin on the bobbin winding unit.
  7. Press the stopper of the bobbin winder unit to the left against the bobbin until the position engages.
  10. Push the button Bobbin Winder.
  11. The machine winds.
  12. To stop the winding process, press the button Bobbin Winder after a few rotations again.
  14. Cut the end of the thread just above the bobbin.
  16. To start the winding process, push the button Bobbin Winder.
  17. To stop the winding process, push the button Bobbin Winder again.
  18. As soon as the bobbin is full, the machine stops the winding process automatically.
  19. Remove the bobbin and cut the thread.

Tip

The machine is equipped with a separate winding motor so that winding can also be performed during sewing.