Lubricating the Machine
By oiling the hook, the occurrence of unwanted noises in the hook area can be avoided. Only use the supplied sewing machine oil M0-70 or alternatively the sewing machine oil OP-8J or Klüber OY 100 for this sewing machine. bernette recommends oiling the hook at the following occasions:
- Prior to the machine's first use
- after a longer downtime of the machine
- in case of intensive use: daily before sewing
- in case of unwanted noises in the hook area
CAUTION
Electronically Driven Components
Risk of injury near the needle and the hook.
- Raise the presser foot.
- Switch the machine off and disconnect it from the power supply.
- Lubricate the marked areas with 3 drops of oil each.
- Remove the bobbin case.
- Clean the hook race area with a brush and a soft cloth. Never use any sharp instruments.
- Lubricate the marked areas with 1 drops of oil each on the felt.
- Turn the handwheel counterclockwise a few times and remove any excess oil with a cloth.
- Insert the bobbin case.
- Sew on a test fabric.