Removing the Presser Foot Sole

  Video

Removing the presser foot sole provides better access to the needle/feed dog area, e.g., when changing the sole or removing the stitch plate to clean the machine.

    Prerequisite:

  1. The needles are in the top position.
  2. The presser foot is raised.
  1. Press the release button on the rear side of the presser foot shaft.
  2. The presser foot sole is disengaged.
  4. Lift the presser foot spring slightly and remove the presser foot.

Fitting the Presser Foot Sole

  1. Slightly lift the presser foot spring and place the pin of the new presser foot sole under the notch on the presser foot shaft.
  2. Carefully lower the presser foot lifter until the shaft notch engages in the presser foot sole pin.