Knotting the thread
Tying on two thread ends is often used for changing a needle thread or looper thread. Keep the knotted area as little as possible to reduce friction in the thread path.
NOTICE
Pulling a Thread Tie through the Needle Eye
The needle can be bent. A bent needle affects the stitch formation.
- Cut the tie in front of the needle eye and thread the needle individually.
- Form a loop with the black thread.
- Thread the red thread end through the thread loop from below.
- Pull the red thread underneath both black threads and guide it through the loop from above.
- Hold one thread end of each colour and pull them apart.
