Cleaning the Looper Area

  Video

Dust, fabric and thread remnants accumulate in the looper area during coverstitching. They should be removed regularly.

NOTICE

Damage by cleaning with compressed air

Cleaning using aerosol sprays or compressed air may cause permanent damage to your machine. A repair by the authorized bernette dealer is required.

  1. Remove fabric scraps and thread remnants using a vacuum cleaner with soft tip.

    Prerequisite:

  1. The presser foot is raised.
  2. The needles are in the top position.
  3. The machine is switched off.
  1. Remove the presser foot sole.
  2. Unscrew the stitch plate from the freearm.
  4. Remove dust, fabric and thread remnants with the brush or a vacuum cleaner.
  6. Fit the stitch plate.
  8. Slowly turn the handwheel to check that the knife, needles, and feed dogs do not interfere with each other's movement.
  9. Attach the presser foot.