Changing the Needle Thread

  1. Cut the thread above the thread cone.
  2. Change the thread cone.
  3. Tie the threaded thread to the new thread. Knotting the thread
  5. Pull the threaded end of the thread until the newly knotted thread is in front of the needle eye.

  6. NOTICE

    Pulling a thread tie through the needle eye

    The needle can be bent. A bent needle affects the stitch formation.

    1. Cut the tie in front of the needle eye and thread the needle individually.
  7. Cut off the new thread behind the knotting.
  9. Remove the excess thread from the needle eye.
  10. Thread the needle eye.
  11. Place the thread under the presser foot to the left.