Sew Outer Curves and Circles

  1. Cut away the seam allowance in one place along the length of the presser foot.
  3. Start and end the seam at the cut seam allowance.
  4. if seam waving out happens: set the differential feed to 1,5 − 2.
  5. if puckering hapens: set the differential feed to 0.7 − 1.
  6. At the seam end, sew 1 ─ 2 stitches over the seam beginning.
  7. Lower the needle and raise the presser foot.
  8. Turn the fabric off to the left of the presser foot.
  10. Lower the presser foot and sew over and beyond the fabric.