Changing the Presser Foot

    Prerequisite:

  1. The needles are in the top position.
  2. The presser foot is raised.
  1. Press the release button on the rear side of the presser foot shaft.
  2. The presser foot is released.
  4. Lift the presser foot spring slightly and remove the presser foot.
  5. Lift the presser foot spring slightly and place the new presser foot beneath the shaft groove so that the shaft groove lies exactly above the presser foot pin.
  6. Lower the presser foot shaft carefully until the shaft groove engages with the presser foot pin.
  8. Raise the presser foot.