Preparing the Machine for Overlock or Overlock/Chainstitch Combo

The machine can be set up for finishing the fabric edge with fabric cut with just a few movements.

    Prerequisite:

  1. The looper cover is opened.
  1. Set the Upper Looper On/Off to the right.Setting the upper looper on/off
  2. Adjust the knife according to the stitch settings.Knife on/off
  3. Knife cover insert is attached. Removing/attaching the knife cover insert
  4. The machine is prepared for overlock or overlock/chainstitch combo.
  5. Perform the sewing start.Sewing Start