Preparing the Machine for Cover- and Chainstitch

For hemming, basting or sewing together without cutting the fabric, the machine can be set up for coverstitch or chainstitch with just a few movements.

  1. Set the Upper Looper On/Off to the left.Setting the upper looper on/off
  2. Adjust the knife according to the stitch settings.Knife on/off
  3. Coverstitch insert is attached. Removing/attaching the coverstitch insert
  4. The machine is prepared for a coverstitch or a chainstitch.
  5. Perform the sewing start.Sewing Start