Perfoming a Sewing Test for an Coverstitch

    Prerequisite:

  1. The sewing start has been performed.
  1. Raise the presser foot.
  2. Place the fabric under the presser foot such that the presser foot lies completely on the fabric.
  3. Lower the presser foot.
  4. Press the foot control and start sewing slowly. Guide the fabric gently as the machine automatically feeds the material.
  5. Do not sew beyond the end of the fabric.
  6. Set the needles to topmost position.
  7. Raise the presser foot.
  8. Pull the needle thread between the fabric and the presser foot to the back with the coverstitch lock tool and cut it.
  9. Pull the sewing project to the back left and cut the looper thread.
  10. The seam end is secured.
  11. Assess the sewing test and make any necessary adjustments until the stitch setting matches the material combination.