Cleaning the Looper Area

Dust, fabric and thread remnants accumulate in the looper area during coverstitching. They should be removed regularly.

    Prerequisite:

  1. The presser foot is raised.
  2. The needles are in the top position.
  3. The machine is switched off.
  1. Remove the presser foot.
  2. Unscrew the stitch plate from the freearm.
  4. Remove dust, fabric and thread remnants with the brush or a vacuum cleaner.
  6. Attach the stitch plate and screw it on.
  8. By slowly turning the handwheel, ensure that the knife, the needle and the feed dogs are not impeded in their movement.
  9. Attach the presser foot.