Changing the Needle Thread

NOTICE

Pulling a Thread Tie through the Needle Eye

The needle can be bent. A bent needle affects the stitch formation.

  1. Cut the tie in front of the needle eye and thread the needle individually.
  1. Cut the thread above the thread cone.
  2. Change the thread cone.
  3. Tie the threaded thread to the new thread.
  5. Pull the threaded end of the thread until the newly knotted thread is in front of the needle eye.
  6. Cut off the new thread behind the knotting.
  8. Remove the excess thread from the needle eye.
  9. Thread the needle eye.
  10. Place the thread under the presser foot to the left.