Preparing for Threading

Before threading, make sure that the machine settings match with the required stitch.

The machine has color-coded threading paths. Correct threading is ensured when following the color markings.

    Prerequisite:

  1. The retractable thread guide is fully extended.
  2. The needles are at the top position. Positioning the needles up/down 
  3. All threads and needles that are not needed for the particular stitch have been removed.
  1. Raise the presser foot.
  2. The thread tensions are released and the thread can be inserted without resistance.
  3. Place the thread cones on the respective spool pin.
  4. Place the thread from the back through the thread guide.
  6. Engage the thread in the thread pretension.
  8. Place the thread along the thread path between the thread tension discs.