2-Thread Wrapped Overlock Narrow (RN)

Looper thread (red) wraps fabric edge too loosely.

  1. Increase LL-thread tension (red).
  2. Reduce the mtc mircro thread control.
  3. Increase the cutting width CW.

Looper thread (red) wraps fabric edge too tightly.

  1. Reduce LL-thread tension (red).
  2. Increase the mtc micro thread control.
  3. Reduce the cutting width CW.
  4. Check the rolled hem selection N/R position.

Needle thread (green) forms loops on bottom side of the fabric.

  1. Reduce LL-thread tension (red).
  2. Increase RN-thread tension (green).

The fabric edge forms a tunnel or curls.

  1. Reduce LL-thread tension (red).
  2. Increase the mtc micro thread control.
  3. Reduce the cutting width CW.
  4. Check the rolled hem selection N/R position.

The seam puckers.

  1. Reduce RN-thread tension (green).
  2. Set the differential feed between 1 and 0.6 (stretching).
  3. Reduce the stitch length SL.