Threading the right cover needle thread RN/green

The right cover needle thread is provided with this blue mark over the entire threading path.

    Forutsetning:

  1. Threading preparation has been performed.
  1. Pull the thread under the thread guide plate to the left behind the green marking.
  3. Place the thread over the upper needle thread take-up lever cover.
  4. Pull the thread up around the thread take-up guide and pull it along the corresponding thread path towards the needle.
  6. Hook the thread into the third thread guide from left of the needle holder.
  7. Thread the needle eye.
  8. Place the thread beneath the presser foot to the back left.
  9. Lower the presser foot when all necessary threads have been threaded.