Index
A
- Adjusting the Presser Foot Position via the Knee Lifter of the Free Hand System
- Adjusting the Upper Thread Tension
- Alphabet
- Altering the Stitch Density
- Attaching the FHS knee lifter
- Attaching the Hoop
- Attaching the Module
- Attaching the Presser Foot Sole
- Attaching the Seam Guide
B
C
- Calibrating the Display
- Calibrating the Embroidery Hoop
- Calling up the Creative Consultant
- Calling up the Tutorial
- Changing the Needle
- Changing the Presser Foot
- Changing the Presser Foot Holder
- Changing the Stitch Plate
- Checking the Firmware Version
- Checking the Stitch Plate in the User Interface
- Cleaning the Feed Dog
- Cleaning the Hook
- Combination Mode
- Combining Embroidery Designs
D
E
F
- Fabric Thickness Measurement
- Feed Dog Up/Down
- Fitting the Embroidery Needle
- Fitting the Stitch Plate
- Foot Control
H
I
M
N
O
P
- Power Cable
- Practical Stitches
- Preparing the Threading
- Removing the Presser Foot Sole
- Programming the Securing Stitches
Q
R
- Raising/Lowering the Needle
- Regulating the Speed
- Regulating the Speed
- Regulating the Speed
- Restoring the Default Settings
- Reverse Sewing
S
- Safety Instructions
- Saving a Stitch Pattern Combination
- Second Spool Pin
- Selecting a Stitch Pattern
- Selecting an Embroidery Design
- Selecting the Language
- Setting the Display Brightness
- Setting the Display Color
- Setting the Lower Thread Indicator
- Setting the Presser Foot Pressure
- Setting the Sewing Light
- Setting the Upper Thread Indicator
- Sewing Corners
- Slide-on Table
- Sound On/Off
- Stitch Designer
T
- Technical Specifications
- Threading the Bobbin Thread
- Threading the Twin Needle
- Threading the Upper Thread
- Troubleshooting