Altering the Stitch Density

With satin stitches (e. g. No. 101) the stitch density can be altered. A larger number means a larger stitch distance, i.e. the stitch is sewn less densely. For a high stitch density, the number must be decreased. Stitch density 1 is the minimum. The set stitch pattern length is not changed by altering the stitch density.

  1. Select the satin stitch.
  3. Tap i-Dialog.
  5. Tap Altering the Pattern Length/Stitch Density.
  6. To increase the stitch density, tap (1) Minus.
  7. To reduce the stitch density, tap (1) Plus.