Sewing On Buttons

The Button Sew-on Program can be used to sew on buttons with two or four holes, press studs or snap fasteners. To enhance the stability, the Button Sew-on Program always stitches into the left hole of the button. As for a button with 4 holes, the two front holes should be sewn first.

The first securing stitch of the Button Sew-on Program alwasy stitches into the left hole of the button.

  1. Attach the Button Sew-on Foot (RC).
  1. Tap Buttonholes.
  2. Lower the feed dog.
  3. Select the Button Sew-on Program No. 60.
  4. Fit the button into the sewing project.
  5. Check distances between holes with the handwheel. If necessary, alter the stitch width.
  7. Hold the threads when starting to sew.
  8. The machine sews the buttonhole program and stops automatically.
  9. When a stem is needed, place a darning needle on the buttonhole and sew.
  10. Pull the two bobbin threads until the thread ends of the upper threads are visible on the wrong side of the fabric.
  11. Tie the threads manually.