Attaching the Embroidery Module

NOTICE

Transporting the Embroidery Module

Damage to the embroidery module connection and machine.

  1. Remove the embroidery module before transporting the machine.
  1. Make sure that the module and the machine are placed on a stable, even surface.
  2. Ensure that the embroidery arm can move freely.
  3. Lift the embroidery module on the left side.
  4. Carefully push the module from left to right into the embroidery module connection (1) of the machine so that it engages.
  6. Hold the embroidery module, press the release button and pull it out.