Embroidering via the Button «Start/Stop»

In case of a power cut the embroidery process is interrupted. After the restart the machine goes to the position which was embroidered last.

  2. Push the button Start/Stop until the embroidery machine starts.
  3. All parts of the design being in the current color are embroidered.
  4. The embroidery machine stops automatically at the end.
  5. Both threads are cut automatically.
  6. The embroidery machine switches to the next color automatically.
  7. Change the upper thread.
  9. To embroider the new color, push the button Start/Stop.
  1. After having completed the embroidery design, the machine stops automatically and the threads are cut automatically.
  1. To end the embroidery design, tap Confirm (1).