WARNING

To reduce the risk of burns, fire, electric shock or injury to persons, the following instructions must be observed.

General Facts

• This machine may only be used for the purpose described in this instruction manual.

Working Environment

• Do not use the machine outdoors.
• Only use the machine in dry rooms.
• Do not use the machine in a humid area.
• Do not use the machine in rooms where aerosol products (sprays) are being used.
• Do not use the machine in rooms where oxygen is dispensed.

Technical Condition

• Never use the machine when it is damp.
• Do not use the machine if it is not working properly.
• Do not use the machine if a cable or the plug is damaged.
• Do not use the machine if it has been dropped, damaged or has fallen into water.
• If the machine is damaged or does not work properly, have the machine checked or repaired by your local bernette dealer.
• Keep all ventilation openings of the machine and the foot control free of lint, dust and loose cloth.
• Do not use the machine if the ventilation openings are blocked.

Accessories and Supplies

• Only use the accessories recommended by the manufacturer.
• Always use the original bernette Stitch Plate.
  An incorrect stitch plate can result in needle breakage.
• Use only straight needles of good quality.
  Bent or damaged needles can cause needle breakage.
• The machine is double-insulated.
  Only use original spare parts. See instructions for servicing of double-insulated products.
• To lubricate the machine, only use oil recommended by bernette.

Appropriate Use

• The machine may be used, cleaned and maintained by children older than eight or by people with reduced physical, sensory or mental capabilities or if there is a lack of experience and knowledge as long as they have been given instructions.
• Furthermore, these persons must be supervised while working with the machine, and/or they must know the safe operation of the machine and be aware of the resulting hazards.
• Children are not allowed to play with the machine.
• Special care should be taken when the machine is operated by or in the presence of children.
• Only use the machine with the supplied power cable.
• USA and Canada only: Do not connect power plug NEMA 1-15 to circuits exceeding 150 volt-to-ground.
• If the machine is to be used in a country other than the country of origin, obtain a power cable suitable for this country from a bernette dealer.
• Only use this machine with the supplied foot control of type FC-210.
• Do not insert any objects into the openings of the machine.
• Do not place any objects on the foot control.
• While sewing, guide the fabric gently. Pulling and pushing the fabric can cause needle breakage.
• Keep fingers away from all moving parts.
• Special care is required in the needle area.
• Only lift the machine by the handle.
• For activities in the needle area - such as threading the needle, changing the needle, threading the looper or changing the presser foot - switch off the machine.
• To switch off, set the power switch to «0».
• When protective covers are removed, when the machine is oiled or when other cleaning and maintenance operations mentioned in this instruction manual are carried out, switch off the machine and disconnect the power plug from the outlet.
• Pull the plug out of the outlet by pulling on the plug. Do not pull on the cable.