Programming the "Needle Up/Down" Button

The hovering height of the presser foot can be set for the sewing stop with the lower needle.

  2. Tap Settings.
  4. Tap Sewing.
  6. Tap Programming Buttons and Icons.
  8. Tap Programming the Needle Up/Down Button.
  11. To set the hovering height of the lower needle to 2 mm, tap Presser Foot Hovering Height 2.
  13. To set the hovering height of the lower needle to 6 mm, tap Presser Foot Hovering Height 6.

NOTICE! If the ruler foot is being used, the presser foot hovering height may be maximum 2 mm, in order to avoid a collision with the needle holder.