Attaching the Hopper Embroidery Foot

  1. Raise the needle.
  2. Lock the screen.
  3. Raise the presser foot.
  4. Remove the presser foot holder. Removing the Presser Foot Holder
  5. Push the presser foot lifter all the way up and hold it there. Place the hopper embroidery foot on the presser foot bar. Make sure the spring tension lever is resting on the needle holder.
  7. Firmly press on the hopper embroidery foot from below and tighten the fixing screw.
  9. Unlock the screen.
  10. Tap the Presser Foot status icon and select the attached presser foot in the area Presser Foot Overview. Presser Foot Selection