Preparing the Machine for Sewing

For your sewing project, you must prepare and set the machine accordingly.

    Prerequisite:

  1. The machine is switched on.
  2. The sewing settings have been made. Sewing Settings
  3. The foot control is connected. Connecting the Foot Control
  1. Select the sewing mode via the start page. Home Screen
  2. Remove the embroidery hoop if necessary. Attaching and Removing the Hoop
  3. Remove the embroidery module if necessary. Connecting and Removing the Embroidery Module
  4. Raise the feed dog if necessary.
  5. Use a suitable stitch plate. Changing the Stitch Plate
  6. Use a suitable sewing needle. Changing the Needle
  7. Fit the appropriate presser foot. Presser Foot Selection
  8. Prepare and edit stitch pattern. Prepare and Edit Stitch Pattern
  9. Thread a suitable bobbin thread. Threading the Bobbin Thread
  10. Thread a suitable upper thread. Upper Thread