Preparing the Machine for Embroidery

For your embroidery project you must prepare and set the machine accordingly.

    Prerequisite:

  1. The machine is switched on.
  2. The embroidery settings have been made. Embroidery Settings
  1. Select embroidery mode via the start page. Home Screen
  2. The Embroidery Screen appears. Embroidery Screen
  3. Use a suitable stitch plate. Changing the Stitch Plate
  4. Insert a suitable embroidery needle. Changing the Needle
  5. Attach and select a suitable embroidery foot. Presser Foot Selection
  6. Attach the Embroidery Module. Connecting and Removing the Embroidery Module
  7. The feed dog is lowered automatically.
  8. Prepare and edit embroidery designs. Prepare and Edit Embroidery Designs
  9. Attach the suitable hoop. Attaching and Removing the Hoop
  10. Thread a suitable bobbin thread. Threading the Bobbin Thread
  11. Thread a suitable upper thread. Threading the Single Needle