Language
cs
da
de
english
es
fr
hu
it
nl
no
pl
pt
ru
sv
Home
My bernette
Machine Overview
Front view
Overview - Needle area
Overview Presser Foot
Overview - Looper area
Overview Threading area
Overview - Side panel
Symbols on the machine
Default Values
Overview - Standard Accessories
Included Accessories
Accessories behind the Threader Cover
Accessories Box
Setting Up the Machine
Working Area
Connection and Switching On
Connecting the Machine and Foot Control
Use of the Power Cable (only USA/Canada)
Switching the Machine and Sewing Light On/Off
Foot Control
Press the Foot Control
Handwheel
Machine Covers
Open/Close the Threader Cover
Coverstitch insert
Removing/attaching the Coverstitch Insert for the Slide-on Table
Spool Holder
Attaching the Spool Holder
Preparing the Thread Guide
Attaching the Spool Stabilizer
Place the Spool Disc
Using the Spool Net
Presser Foot
Positioning the Presser Foot Up/Down
Lifting the Presser Foot Up/Down with the Knee Lifter
Changing the Presser Foot
Needle Area
Needle holder
Changing the Needle
Positioning the Needles Up/Down
Threading the Needle Manually
Sewing Assistance
Using the Thread Cutter
Needle Pad
Attaching/Removing the Knee Llifter
Attaching/Removing the Freearm Cover
Attaching/Removing the Slide-on Table
Attaching the Decorative Threads Guide
Sewing Start
Check before Starting to Sew
Selecting the Fabric
Selecting the Thread
Needle Thread
Check the Needle/Thread Combination
Looper Thread
Selecting the Needle
Detect Defective Needles
Needle Overview
Selecting a Stitch
Stitch Type
Coverstitch
Hem
3- / 4-Thread Coverstitch
Decorative Seam
Chainstitch
Basting
2-Thread Chainstitch
Stitch Chart
Machine Settings
Adjusting the Stitch Width
Setting the Stitch Length
Setting the mtc micro thread control
Setting the Presser Foot Pressure
Adjusting the thread tension
Adjusting the Differential Feed
Default Value "1"
Gathering/Gather to fit "1.5 – 2"
Stretching "0.6"
Threading
Preparing for Threading
Threading the Needle Thread
Threading the Left Coverstitch Needle Thread LC/Yellow
Threading the Center Coverstitch Needle Thread CC/Green
Threading the Right Coverstitch Needle Thread RC/Blue
Threading the Looper Thread
Using the Air Threader
Threading the Looper Thread with an Auxiliary Thread
Using the Threading Wire
Changing the Thread
Knotting Thick Thread
Changing the Needle Thread
Changing the Looper Thread
Sewing Test
Perfoming a Sewing Test for an Coverstitch
Perfoming a Sewing Test for an Chainstitch
Optimizing Stitches
2-Thread Chainstitch (RC)
4-Thread Coverstitch
3-Thread Coverstitch Wide (LC-RC)
3-Thread Coverstitch Narrow (LC-CC)
3-Thread Coverstitch Narrow (CC-RC)
Practical Overlocking
Securing Coverstitches
Securing Cover- and Chainstitches at the Start of the Seam
Securing Cover- and Chainstitches at the Seam End
Securing Coverstitches at the Seam End
Securing Chainstitches at Seam End:
How to Undo Coverstitches
Undoing Coverstitches
Undoing Chainstitches
Sewing a Hem
Joining Seams
Binding Seams
Topstitching Seams
Gathering a Seam
Appendix
Storing and Transporting the Machine
Storing the Machine
Transporting the Machine
Maintenance and Cleaning the Machine
Cleaning the machine
Cleaning the Looper Area
Cleaning the Air Threader Pipes
Cleaning the Suction Feet
Oiling the Machine
Troubleshooting
Specifications
IMPORTANT SAFETY INSTRUCTIONS
DANGER
WARNING
SAVE THESE INSTRUCTIONS
General Information
Availability of the Instruction Manual
Proper Use
Equipment and Scope of Delivery
Servicing of Double-insulated Products
Environmental Protection
Explanation of Symbols