Language
cs
da
de
english
es
fr
hu
it
nl
no
pl
pt
ru
sv
Home
IMPORTANT SAFETY INSTRUCTIONS
DANGER
WARNING
SAVE THESE INSTRUCTIONS
General Information
Availability of the Instruction Manual
Proper Use
Equipment and Scope of Delivery
Servicing of Double-insulated Products
Environmental Protection
Explanation of Symbols
My bernette
Machine
Front view
Overview - Needle area
Overview Presser Foot
Overview - Looper area
Overview Threading area
Overview - Side panel
Symbols
Default Value
Accessories
Included Accessories
Accessories behind the Threader Cover
Accessories Box
Set Up the Machine
Working Area
Connection and Switching On
Connecting the Machine and Foot Control
Use of the Power Cable (only USA/Canada)
Switching the Machine and Sewing Light On/Off
Foot Control
Press the Foot Control
Handwheel
Machine cover
Open/Close the Threader Cover
Coverstitch insert
Removing/attaching the Coverstitch Insert for the Slide-on Table
Thread Stand
Attaching the Spool Holder
Preparing the Thread Guide
Attaching the Spool Stabilizer
Place the Spool Disc
Using the Spool Net
Presser Foot
Raising/Lowering the Presser Foot
Raising/lowering the presser foot using the Knee Lifter (Free Hand System)
Removing the Presser Foot Sole
Needle
Needle holder
Changing the Needle
Positioning the Needles Up/Down
Threading the Needle Manually
Sewing Assistance
Using the thread cutter
Needle Pad
Attaching/removing the Knee Lifter
Attaching/Removing the Freearm Cover
Attach the slide-on table.
Attaching the Decorative Threads Guide
Material selection
Check before Starting to Sew
Fabric selection
Selecting the Thread
Needle Thread
Check the Needle/Thread Combination
Looper Thread
Needle Selection
Detect Defective Needles
Needle Overview
Stitch selection
Stitch Type
Cover stitches
Hem
3- / 4-Thread Coverstitch
Decorative Seam
Chain Stitches
Basting
2-Thread Chainstitch
Setting the Stitch
Sewing Settings
Setting the Stitch Length
Setting the Presser Foot Pressure
Thread Tension
Adjusting the Differential Feed
Default Value "1"
Gathering/Gather to fit "1.5 – 2"
Stretching "0.6"
Threading
Preparing for Threading
Needle Threads
Threading the coverstitch needle left LC/yellow
Threading the center cover needle thread CC/blue
Threading the right cover needle thread RN/green
Looper thread
Threading the Looper Thread
Threading the Looper Thread with an Auxiliary Thread
Using the Threading Wire
Changing the Thread
Knotting the thread
Changing the Needle Thread
Changing the Looper Thread
Stitch Optimization
Perfoming a Sewing Test for an Coverstitch
Perfoming a Sewing Test for a Chainstitch
Optimizing Stitches
2-Thread Chainstitch (RC)
4-Thread Coverstitch
3-Thread Coverstitch Wide (LC-RC)
3-Thread Coverstitch Narrow (LC-CC)
3-Thread Coverstitch Narrow (CC-RC)
Practical Sewing
Securing Coverstitches
Securing Cover- and Chainstitches at the Start of the Seam
Securing Cover- and Chainstitches at the Seam End
Securing Coverstitches at the Seam End
Securing Chainstitches at Seam End:
How to Undo Coverstitches
Undoing Coverstitches
Undoing Chainstitches
Sewing a Hem
Join Seam
Binding Seams
Topstitching Seams
Gathering a Seam
Appendix
Storage, Transport and Disposal
Storing the Machine
Transporting the Machine
Disposing the Machine
Machine
Cleaning the Machine
Cleaning the Looper Area
Clean Air Threader Pipes
Cleaning the Suction Feet
Oiling the looper area
Troubleshooting
Specifications